NEW! BFS-MP Series
NEW!
|
![]() |
|||||||||||||
|
||||||||||||||
![]() |
||||||||||||||
![]() |
|
| BFS and BFS-TC series freezing stages fit
easily onto most microtomes. These thermoelectric devices have no moving
parts and need only AC current and a trickle of water for operation. Freezing
starts immediately and can bemaintained indefinitely.Stage temperature
is adjustable so that optimum cutting temperatures can be set for different
kinds of tissue.
Physitemp Freezing Stages are especially valuable for multiple sectioning of brains and other organs which are too large for cryostats. Small stages (BFS-3, BFS-3TC, BFS-5, BFS-5TC) fit all microtomes. The larger stages (BFS-30 and BFS-30TC) are designed for sledge microtomes such as AO 860. Stages can also be used to control the temperature of
materials other than tissue and have been used in research on integrated
circuits, photo diodes, liquid crystal, wax formation on fuel oils and
even freezing concrete.
|
|
|
|
|
|
|
| Temperature Range: | -40°C to ambient | -40°C to +60°C | -40°C to +100°C |
| Resolution: | 1/2 amp (curr. readout) |
|
|
| Power Supply: |
or as specified |
|
|
| Heat Removal: |
circulating pump & tank unit. |
||
| Weight: |
|
||
| Accessories Supplied: |
|
||
| Other Features: |
|
||
|
Controller can be used as an independent digital thermometer and needle microprobe is provided for this purpose. |
|||
|
|
|
|
| Knife: | 3 1/4" (8cm) | 6 2/3" (17cm) |
| Section Thickness: | 5 microns and up
Calibrated 5-40 microns |
0.4 microns and up
Calibrated 0.5-12 microns |
| Weight: | 14 lbs. | 66 lbs. |
| Accessories supplied: | Knife handle, object clamp,
dust cover |
Knife handle, stropping bevel,
knife holder |
![]() |
FRM and FRM-TC freezing radial microtomes and FSM and
FSM-TC freezing sledge microtomes are complete tissue sectioning systems
and consist of a Physitemp freezing stage paired with a precision radial
or sledge microtome from Japan. These microtomes are well constructed and
feature smooth, simple operation. Tissue sections down to 5 microns (radial)
and 0.5 microns (sledge) can be made easily, with thickness, angle of cut
and angle of attack easily adjusted.
|